Project Description
Vnet 2316J
OVERVIEW
VNET2316J system is 16 ports VDSL DSLAM based all IP and provides very high speed internet service that supports maximum 100Mbps for downstream, 100Mbps for upstream through the existing telephone wire and telephone service simultaneously.
VDSL subscriber unit(VSU) supports FDD-DMT and 997/998 Band plan, at the same time it also supports 6-Band plan and consists of 8 ports per unit to extend and maintain conveniently. Switching Unit(MPU) can support Layer 2 Qos Switching function.
Uplink supports up to 2ports with 10/100/1000Base-T and can support SFP with 100/1000Base-X, so that it can reduce its network configuration expenses efficiently and provide composed management.
All of the units have their LED on front side and this kind of unit type equipment can easily install and maintain in limited space. It provides the best management functions which are standard management function developed by operator position, convenient S/W upgrade, controlling transmission speed, so that it can provide most suitable network solution for subscriber.
FEATURES
| Structure and Installation | – Size : 440(W) × 66(H) × 300(D) – IKANOS VDSL chipset (CO4/5) – L2 Switching Function (16Port + 4) – Controller : MPC 603E core – Module Type Line Card (VDSL & Uplink) – Quick Connector for easy maintenance |
|---|---|
| Up-Link | – 10/100/1000 Base TX 2ports (Default) – Link Aggregation support (!EEE 802.3ad) – Automatic negotiation for 10/100/1000/Full/Half duplex – Automatic MDI/MDIX Support – Port Mirroring |
| VDSL Profile | – 5Band Plan : 100/50 Mbps (Down/Up) – 6Band Plan : 100/100 Mbps (Down/Up) – Module Type → VSU4 : IKANOS CO4 → VSU5 : IKANOS CO5 – Up to 30 Profile Support → Support a variety of VDSL Service |
| Functions | – Support Unit Hot-Swap (Uplink & VDSL unit) – Auto-reset – Access Control List (by L2/3/4) – Host-Access- Control Support – DoS Attack Control Support – Port Scan Attack Detection Support – Packet Length Filtering Support – Port Isolation Support – Filtering (NetBEUI/NetBIOS, Multicast, IP, MAC) – Port Loop Detection Function Support |
| Certification | – VCCI, JATE ※ Meet available to regional regulatory standards like as CE/FCC/UL according to customer needs. |
SPECIFICATION
| Description | System Specification | |
|---|---|---|
| General | Card type Multi-system platform Support wire-speed L2 switching and multicast Support 16K MAC Addresses Enhanced management and security Remote software upgrade (by TFTP/FTP) |
|
| Service Interface | VDSL | Number of Ports : Up to 16ports Line Cording : FDD-DMT based VDSL standards Supports VDSL standards Band plan: uses up to 30MHz – provides up to 100Mbps/100Mbps (Down/Up) line rate |
| Connector | Uplink | Up to 4 port 10/100/1000 Ethernet uplink – Default 10/100/1000 Base TX 2 ports – Optional 10/100/1000 Base TX / 100 or 1000 Base SFP |
| Line | Quick connector 16 Port | |
| Management | RJ-45 1 port for CLI | |
| System Management | CLI (Command Line Interface) : RS-232C Support Telnet and SSH USB 2.0 Host 1 port SNMP MIB-I, II, RMON Configuration Management Performance Management Fault Management Syslog Client Security Management – DHCP, NetBEUI, NetBIOS packet filtering – Limitation of number of MAC address per port |
|
| Layer 2 switching | IEEE 802.3ac – VLAN Tagging IEEE 802.3ad – Link Aggregation IEEE 802.1D – Spanning Tree IEEE 802.1Q – Virtual VLANs IEEE 802.3x – Flow Control Support QoS provisioning on L 2/3/4 and IEEE 802.1p tag Support IGMP V2 proxy Support DHCP Relay and Relay Snooping Support Port Mirroring Support Broadcast Storm Recovery |
|
| Power Supply | Operating Voltage : AC85～140V Power Consumption : Max 68.7W |
|
| Environment | Operating Temperature : -20 ~ 50℃ Operation Humidity : 10 ~ 90RH Storage Temperature : -20 ~ 70℃ |
|
| Physical Measurement | Dimension (W, H, D) : 440 × 66 × 300 (unit: mm) Weights : Approx. 5.1Kg |
|
NETWORK CONFIGURATION
