Vnet 2316J

////Vnet 2316J
Vnet 2316J 2017-12-22T11:27:06+09:00

Project Description

Vnet 2316J


VNET2316J system is 16 ports VDSL DSLAM based all IP and provides very high speed internet service that supports maximum 100Mbps for downstream, 100Mbps for upstream through the existing telephone wire and telephone service simultaneously.

VDSL subscriber unit(VSU) supports FDD-DMT and 997/998 Band plan, at the same time it also supports 6-Band plan and consists of 8 ports per unit to extend and maintain conveniently. Switching Unit(MPU) can support Layer 2 Qos Switching function.

Uplink supports up to 2ports with 10/100/1000Base-T and can support SFP with 100/1000Base-X, so that it can reduce its network configuration expenses efficiently and provide composed management.

All of the units have their LED on front side and this kind of unit type equipment can easily install and maintain in limited space. It provides the best management functions which are standard management function developed by operator position, convenient S/W upgrade, controlling transmission speed, so that it can provide most suitable network solution for subscriber.


Structure and Installation – Size : 440(W) × 66(H) × 300(D)
– IKANOS VDSL chipset (CO4/5)
– L2 Switching Function (16Port + 4)
– Controller : MPC 603E core
– Module Type Line Card (VDSL & Uplink)
– Quick Connector for easy maintenance
Up-Link – 10/100/1000 Base TX 2ports (Default)
– Link Aggregation support (!EEE 802.3ad)
– Automatic negotiation for 10/100/1000/Full/Half duplex
– Automatic MDI/MDIX Support
– Port Mirroring
VDSL Profile – 5Band Plan : 100/50 Mbps (Down/Up)
– 6Band Plan : 100/100 Mbps (Down/Up)
– Module Type
– Up to 30 Profile Support
→ Support a variety of VDSL Service
Functions – Support Unit Hot-Swap (Uplink & VDSL unit)
– Auto-reset
– Access Control List (by L2/3/4)
– Host-Access- Control Support
– DoS Attack Control Support
– Port Scan Attack Detection Support
– Packet Length Filtering Support
– Port Isolation Support
– Filtering (NetBEUI/NetBIOS, Multicast, IP, MAC)
– Port Loop Detection Function Support
Certification – VCCI, JATE
※ Meet available to regional regulatory standards like as CE/FCC/UL according to customer needs.


Description System Specification
General Card type Multi-system platform
Support wire-speed L2 switching and multicast
Support 16K MAC Addresses
Enhanced management and security
Remote software upgrade (by TFTP/FTP)
Service Interface VDSL Number of Ports : Up to 16ports
Line Cording : FDD-DMT based VDSL standards
Supports VDSL standards Band plan: uses up to 30MHz
– provides up to 100Mbps/100Mbps (Down/Up) line rate
Connector Uplink Up to 4 port 10/100/1000 Ethernet uplink
– Default 10/100/1000 Base TX 2 ports
– Optional 10/100/1000 Base TX / 100 or 1000 Base SFP
Line Quick connector 16 Port
Management RJ-45 1 port for CLI
System Management CLI (Command Line Interface) : RS-232C
Support Telnet and SSH
USB 2.0 Host 1 port
Configuration Management
Performance Management
Fault Management
Syslog Client
Security Management
– DHCP, NetBEUI, NetBIOS packet filtering
– Limitation of number of MAC address per port
Layer 2 switching IEEE 802.3ac – VLAN Tagging
IEEE 802.3ad – Link Aggregation
IEEE 802.1D – Spanning Tree
IEEE 802.1Q – Virtual VLANs
IEEE 802.3x – Flow Control
Support QoS provisioning on L 2/3/4 and IEEE 802.1p tag
Support IGMP V2 proxy
Support DHCP Relay and Relay Snooping
Support Port Mirroring
Support Broadcast Storm Recovery
Power Supply Operating Voltage : AC85~140V
Power Consumption : Max 68.7W
Environment Operating Temperature : -20 ~ 50℃
Operation Humidity : 10 ~ 90RH
Storage Temperature : -20 ~ 70℃
Physical Measurement Dimension (W, H, D) : 440 × 66 × 300 (unit: mm)
Weights : Approx. 5.1Kg